Ok so we have seen CV joints fail….

Now we believe we know why…… so keep reading whilst we take you down the rabbit hole and get to the real reason .

So, you have probably seen a few posts on facebook in regards the CV failure …

And a lot of blame has  been dished out in all directions..

IEOS.  LIFTS…Driving style…you name it.

Well, I am here to tell you that I believe that are  NOT to blame….

In fact, it is so simple a cause that you will probably chuckle to yourself when I tell you..

And no doubt some will totally disagree with me…

And that’s ok… you can do that.

But what I am about to tell you will make sense the more you sit and think about it….

So let’s start by looking at the failure from the start…….

The CV joint is actually 2 parts……

You have part 1, the inner and outer collars with some balls for power transfer between the 2 collars…..

And part 2… the lubrication system… Grease!

Now without part 2 in good order … part 1 will fail.

And that is what we are seeing… the lubrication system failing causing the CV joint to fail…

So why is the lubrication system failing….

Well, this is down to the rubber boot being damaged.

It’s that simple….the boot gets torn, the grease comes out and there you have it.

Now the question is HOW.

And to find this out we looked at all the failures….and found that they seem to be completely random

Standard, lifted, road use , 4WD use , it was all over the place…

There was one chap who had 2 failures within a couple of 1000Klm’s of use….

And this told us a lot……

That although it may seem random…. it isn’t, well to my way of thinking anyway

So, what is it…….

Road Debris……

Yep, that’s right …. Just road Debris…..

And what do I mean by that…….

Well, there is all sorts of crap on the roads… small stones… broken glass… bits of headlights… stop lights…..screws… nails….

You get the picture

So, what is happening is some of this Debris is flicked up by your tires… or the car in front of you….

You never notice it. but its flying around all the time…. and 99% of the time it is of no consequence…

BUT for the unlucky ones it does matter, as the CV is flying around with what is effectively a catcher’s glove or funnel on the front of it

It’s just enough to catch the Debris and run it around the rubber joint.

And as the joint rotates it gets pinched at the bottom and cuts the rubber boot.

And we all know what happens from there……

So, what’s the solution I hear you ask….

SIMPLE…. we have come up with a deflector that protects the CV joint boot from the Debris

Yep, that simple!

Please click the link below to order your protection

CV Saver | EF Expedition Co.

Debry around the CV boot on INEOS Grenadier